by Charles Puffer <cpuffernews@[EMAIL PROTECTED]
>
Sep 23, 2007 at 09:40 PM
Robert Seaman wrote:
> You have to start slowly and gradualy increase speed of extractor. very
slow
> for unwired frames
>
> <terpla122@[EMAIL PROTECTED]
> wrote in message
> news:1189735760.064577.161090@[EMAIL PROTECTED]
>> First off... thanks for all the responses about the best uncapping
>> method.
>>
>> My next question is how many rpm's does the 22" drum of the radial
>> extractor need to be spun to extract from unwired, wax foundation,
>> shallow frames?
>>
>> The honey will be at about 80-85 degrees.
>>
>> Sure don't want to ruin any comb.
>>
>
>
Also if you have to flip the frames remember that side to is not getting
extracted. So do not speed up to much on side one.
